Gateway Tabor III front panel pinout

Last modified: Sun Mar 30 09:56:03 EDT 2014

Works for me:

1513 PWR LED −1197 RESET SW5 PWR SW3 HDD LED −1 HDD LED +
161412108 RESET SW6 PWR SW42 PWR LED +

This is what Gateway documented:

Pin Signal Name In/Out Description Pin Signal Name In/Out Description
1 HD_PWR Out Hard disk LED pullup (5 V, 15 mA max) 2 HD_BLNK_GRN+BLNK Out Front panel green LED
3 HD Active# Out Hard disk active LED 4 HD_BLNK_YLW_BLNK Out Front panel yellow LED
5 GND   Ground 6 SW_ON# In Front panel On/Off button
7 FP_RESET# In Front panel Reset button 8 GND   Ground
9 +5 V Out   10 FPSLP# In Front panel Sleep button
11 IRRX In IrDA serial input 12 GND   Ground
13 GND   Ground 14 Key   Not connected
15 IRTX Out IrDA serial output 16 +5 V Out IR power

 

Gateway's case:

  • Keyed 14-pin connector covering pins 1 to 14.
  • The wires from pins 2, 4, and 13 all went to the power LED.  Apparently it can switch between yellow or green.
  • No reset switch or sleep button.


KB
Home